head_banner

News

  • Why is your drill always unstable?

    Why is your drill always unstable?

    It is actually difficult to define the quality of hole processingreason If the hole has strict tolerance or surface finish requirements, secondary processing such as boring or reaming usually completes the hole to the final machining size. In these cases, the main value ...
    Read more
  • Understand the correct usage of Forming Taps

    Understand the correct usage of Forming Taps

    Forming Taps is just a type of tap, with no chip removal groove and only oil groove in its shape. Most of them are titanium plated Forming Taps , specifically used for cutting threads on soft metal with smaller thickness. Forming Taps is a new type of thread cutting tool that utilizes the princip...
    Read more
  • Characteristics, uses, and types of commonly used reamers

    Characteristics, uses, and types of commonly used reamers

    Characteristics of Reamers:Reamer efficiency (precision boring holes are all single edge cutting, while reamers are all 4-8 edge cutting, so the efficiency is much higher than that of boring cutters), high precision, and the reamer edge is equipped with a blade, so better roughness is obtained; ...
    Read more
  • How to Choose T-Slot Milling Cutter

    How to Choose T-Slot Milling Cutter

    T-Slot Milling Cutter is a professional production and processing of T-shaped hard milling cutters for various mechanical equipment countertops or other structures. Apart from specifications and models, there are not many classifications of T-shaped slot milling cutters. From a structural perspec...
    Read more
  • Application of graphite cutting tools

    Application of graphite cutting tools

    1. About Graphite milling cutter Compared with copper electrodes, graphite electrodes have advantages such as low electrode consumption, fast processing speed, good mechanical processing performance, high processing accuracy, small thermal deformation, light weight, easy surface treatment, high t...
    Read more
  • Six reasons for tap breakage

    Six reasons for tap breakage

    1. Choose the optimal hole bottom size This is the most important reminder. Tapping the bottom hole with a tap requires matching the size of the bottom hole. Generally, the corresponding range of bottom hole sizes is provided in the sample. Please note that this is the range. It is important to r...
    Read more
  • Sorting out common problems with reaming

    Sorting out common problems with reaming

    As is well known, reaming is the last process in the hole system. If certain factors affect it, it is likely that qualified finished products will instantly become waste products. So what should we do if we encounter problems? OPT cutting tools have organized some issues and measures that arise i...
    Read more
  • Why are there so many problems with processing titanium alloys? Perhaps you haven’t read these suggestions at all

    Why are there so many problems with processing titanium alloys? Perhaps you haven’t read these suggestions at all

    Titanium alloy is more difficult to process than most alloy materials, but choosing a suitable tap is still feasible. Titanium material is both hard and lightweight, making it a very attractive metal suitable for aerospace, medical, and other industries. However, the material characteristics of t...
    Read more
  • About Dry Cutting

    About Dry Cutting

     1. What is dry cutting technology With the enhancement of global environmental awareness and the increasingly stringent requirements of environmental protection laws and regulations, the negative effects of Cutting fluid on the environment are increasingly obvious.According to statistics, 20 yea...
    Read more