Analysis and processing step of workpiece processing process
When you got a new project to make a new metal product, preparation for the pre -processing project of metal workpiece, mainly starting from the following aspects,
Confirmation drawing of the workpiece
Choose the right machine equipment
Arrange processing technology and time beat
Prepare cutting tools used in the project
Quality Inspection
Assembly and Package
Specific steps are as follows:
1 Analysis of workpiece design drawings: First of all, you need to carefully analyze the design drawings of the workpiece to understand the geometric shape, size and tolerance requirements of the workpiece. This step is very important because it lays the foundation for subsequent processing processes.
2 Select processing equipment: According to the processing requirements of the workpiece, select the appropriate machine and fixture. When purchasing machine, factors such as production conditions, technical levels, production scale, processing objects. The accuracy of machine directly affects processing efficiency and product qualification rate.
3 The processing process arrangement: The main processing processes include turning, milling, drilling, cutting, etc. According to the shape and requirements of the workpiece, different tools and machine are used. The sequence of processing workpiece on the machine tool and the time season is sorted.
4 According to the drawings of the processing workpiece, the tolerance requirements, the processing process, select the cutting tool. Experienced cutting tools suppliers will give reasonable and economic cutting tools and solutions according to the performance of machine and workpiece materials. It can avoid processing difficulties that may occur due to the particularity of the material, and obtain qualified workpiece smoothly. For example, processing sticky aluminum and titanium alloys, which are easy to get problem on cutting chips, are often pain points in processing. Shenzhen OPT Cutting Tools is experienced cutting tools manufacture
we've been worked with, they provide us cutting solutions in project.
5 Quality inspection: At all stages of workpiece processing, strict quality inspection and quality control are required to ensure that the finished workpiece of the workpiece meet quality standards and meet the requirements of drawing.
6 assembly and packaging delivery: For workpiece of the whole set of equipment, assembly may be required. After completing the inspection, clean the workpiece and then pack it to facilitate subsequent processing and use.
The above steps only provide a typical part of the workpiece processing process. The specific processing process and steps may vary according to the specific requirements and processing conditions of the workpiece.
For machining engine cylinder, valve block, crankshaft, turbine blades machining, connecting rods and other CNC cutting project. We are glad to provide you with a processing plan, welcome to contact us to discuss your project.
Post time: May-24-2024